Item Description Initial value
Auto Restart Time Specifies the time at which the machine
automatically restarts.
If the setting is configured on the machine's
Web page, the setting becomes valid when the
machine restarts.
Auto restart occurs when the machine is in
standby mode. If [Auto Standby Time] is set to
[No], the machine will not be automatically
restarted even if [Auto Restart Time] is set.
4:00
Auto Standby Time Specifies the time interval before the machine
automatically enters standby mode.
However, the machine does not enter standby
mode automatically when a screen or image
from a device connected to the machine is
displayed, or when printing is in progress.
30 minute(s)
For standby press the power
button
Specify whether the machine shuts down or
enters standby mode when the power button is
pressed.
When you select this item, the machine enters
standby mode when the power button is
pressed, and shuts down when the button is
long pressed.
This item is displayed only when using the
RICOH Interactive Whiteboard D3210/
D8600.
Not selected
Display Welcome Screen on
Start
Specify whether to display the Welcome
Screen when the machine power is turned on or
the machine exits the standby mode. If you
configure this setting from the Web page of the
machine, then this setting is reflected after the
whiteboard is restarted.
Selected
Display Guide for External
Input
*2
Upload or delete an image to be displayed on
the display guide for external input.
-
Changing the System Settings
207
To Next Page
Loading...