You must first configure the network and SMTP server settings to send a log by e-mail. For details about
how to configure the Network Settings, see page 167 "Configuring Network Settings". For details about
how to configure the SMTP Server Settings, see page 176 "Configuring SMTP Server Settings".
1. Display Administrator Settings, and then touch , the Collect Debug Logs icon.
2. Select "Attach to Email".
3. Touch [OK].
4. Enter the destination e-mail address.
5. Touch [Send].
6. Touch [OK].
• If the amount of log information exceeds 10 MB, it is automatically split into multiple files. The
maximum file size is 10 MB.
Collecting Logs
203
To Next Page
Loading...