Item Description Initial value
Default Whiteboard Detailed
Settings
Specifies the default whiteboard detailed
settings.
For details about each item, see page 157
"Changing the Detailed Settings".
*5
Use RICOH Interactive
Whiteboard Client Function
Specifies whether or not to use the "RICOH
Interactive Whiteboard Client" function to
access a remote whiteboard from an iPad,
Android tablet, or Windows PC.
Selected
Handwritten Entry with Touch
Pen
Select this setting to use the handwritten entry
mode with touch pen or your fingers. However,
you cannot use the marker function with the
interactive pen and the bottom of the interactive
pen (erase, right-click) if this setting is specified.
Also, the recognition accuracy may decrease,
or the strokes may become connected when the
lines are drawn too fast.
This item is displayed only when using the
RICOH Interactive Whiteboard D5520/
D6500/D6510/D7500/D8400.
Not selected
Use Crestron Control System
*2
Specifies whether or not to use the Crestron
function. When this check box is selected, the
Crestron function becomes enabled, and you
can then enter the IP address, port number, and
IP ID of Crestron Control System.
Not selected
Address
*2
Specify the IP address or host name (up to 255
characters) of Crestron Control System.
Blank
Port Number
*2
Specify the port number (an integer from 0 to
65536) of Crestron Control System.
41794
IP ID
*2
Specify the IP ID (an integer between 3 and
254) of Crestron Control System.
3
Changing the System Settings
209
To Next Page
Loading...