Item Description Initial value
Device Management (SNMP) Set this item when you want to use a device
management software. Select [SNMP v1/v2]
or [SNMP v3] according to the software you
are using. If you enable this item, the following
items must be specified:
• Community Name
• User Name
• Authentication Password
• Encrypted Password
• Context Name
Depending on the settings, the items you can
specify may differ.
SNMP v1/v2
Enable HDMI Converter
Support Mode
Select this to connect an HDMI converter to the
machine.
If this setting is disabled and a device is
connected to the converter, a black screen is
displayed on the machine.
If this setting is enabled and a device is
connected to the converter, the whiteboard
screen is displayed.
Not selected
Reduce Frame Rate of External
Input Display on Whiteboard
Operation
*3
Specify whether or not to reduce the frame rate
of the external input display while operating the
whiteboard. Use this function if the response is
poor when operating the whiteboard while
displaying external input.
Not selected
Changing the System Settings
211
To Next Page
Loading...