Item Description Initial value
Invalidate email address
history
Specifies whether or not to disable the record of
e-mail addresses that are directly entered.
Not selected
Minimum passcode digits Specifies the number of digits (from 4 to 10) to be
used as a passcode.
4
Specify passcode on starting
whiteboard
Specifies whether or not to display the passcode
entry screen when starting the whiteboard.
Not selected
Display IP Address, Host
Name and Passcode
Specifies whether or not to automatically mask
the following information in the upper part of the
mail control screen:
• Host Name
• IP Address
• Passcode
When [Auto Hide] is selected, the entered
passcode is automatically masked one minute
after it has been displayed.
Auto Hide
Fix to [Open with Passcode] Specifies whether or not to require a passcode
when starting a remote whiteboard.
Not selected
Prohibit direct entry of host
whiteboard
Specifies whether or not to prohibit direct address
entry when selecting a host whiteboard.
Not selected
Invalidate host whiteboard
history
Specifies whether or not to disable the record of
direct address entry when selecting a host
whiteboard.
Not selected
Enable SSL/TLS
communication
Specify whether to encrypt communications with
the Web page for the machine.
A self-signed server certificate is pre-installed on
the machine, but you can also install other server
certificates on the machine. For details, see
page 226 "Managing Certificates".
Not selected
Enter passcode on
connecting (For browsing
the whiteboard)
Specifies whether or not to enter a passcode
when joining a remote whiteboard session using
a Web browser.
Selected
Changing the Security Settings
215
To Next Page
Loading...