Ricoh M126 - Page 215

M126/M127/M128 6-10 SM
User primary message Explanation
Held jobs may not be
restored (Insufficient
Memory 37)
This message is only posted once after the firmware has
tried to restore all of the jobs on disk, regardless of the
number of held jobs that were not restored. There are three
versions of this IR, depending upon cause. IRHeldB occurs
when the machine runs out of memory while attempting to
restore jobs from disk.
Held jobs may not be
restored (Config Change
57)
This message is only posted once after the firmware has
tried to restore all of the jobs on disk, regardless of the
number of held jobs that were not restored. There are three
versions of this IR, depending upon cause. IRHeldC occurs
when the machine could not restore jobs from the disk
because the configuration of the machine has changed.
Some of these said configuration changes are code version
changes, paper handling option(s) removed, or the disk was
moved from a different model or speed of machine.
Load <source> <custom
string>
The machine does not detect media meeting the description
<custom string> in <source>, where <source> is Tray 1,
Tray 2, Multi-Page Feeder (MP feeder), or Envelope Feeder.
 Load the input source with the correct type and size
media.
 Cancel the current job.
Load <source> <custom
type>
The machine does not detect media meeting the description
<custom type> in <source>, where <source> is Tray 1 or
Tray 2.
 Load the input source with the correct type and size
media.
 Cancel the current job.
Load <source> <size>
The machine does not detect media meeting the size
requested in the source indicated.
 Load the input source with the correct type and size
media.
 Cancel the current job.