Ricoh M126 - Page 217

M126/M127/M128 6-12 SM
User primary message Explanation
Paper Changes Needed Change or load new media.
PJL OP Message
PJL Seed Message
PJL ST Message
Try one or more of the following:
 press Select (
) to clear the message, and continue
printing.
 Wait for the message to clear.
Remove Paper ADF
This posts when there is paper detected in the ADF upon
POR or when the cover is closed (or any other situation that
re-initializes the scanner). Message clears when paper is
removed.
Remove Paper Standard
Bin
The standard output bin is full or nearly full. Remove the
media from the bin.
Restore Held Jobs.
Go/Stop?
Held jobs were found on disk after a power on/off reset.
Restoring will make these jobs available. Jobs may also be
restored at a later time by turning off and restarting the
machine.
The following actions can be taken:
 Restore
 Do not restore
 More information
Securely Clearing Disk
Space
This message appears when all blocks of the disk are
cleared.
Unsupported USB Device,
Please Remove
Remove the unrecognized device from the USB port on the
front of the machine.
Unsupported USB Hub,
please remove
Remove the unrecognized USB hub/device from the USB
port on the front of the machine.
Unsupported Disk Remove the unsupported disk before continuing.