shooting
Error code Description Action
905
A timeout occurred after dialing the
number and waiting for a response.
Check with remote end if
successive attempts fail.
906 Fax cancelled by user. No action needed.
907
Modem detected a digital line
connection.
Verify the machine is connected to
an analog line. See “Fax
Transmission Service Check” in
“Troubleshooting”.
908 Phone line was disconnected Restore phone line connection.
A00
Received request for unsupported
function from remote fax device.
No action needed.
A01
Received request for unsupported
image width from remote fax device.
No action needed.
A02
Received request for unsupported
image resolution from remote fax
device.
No action needed.
A03
Received request for unsupported
compression type from remote fax
device.
No action needed.
A04
Received request for unsupported
image length from remote fax
device.
No action needed.
F00 Unknown error occurred. No action needed.