Ricoh M126 - Page 307

M126/M127/M128 6-102 SM
Step Questions / actions Yes No
15
Adjust the “Transmit Level” setting in
the SE menu. Press **411 to enter
the SE menu, enter Modem settings,
and select “Transmit Level”.
Test by adjusting the transmitted
signal strength by
decreasing/increasing the ‘Transmit
Level’ setting in steps of 1db. For
example, if default value is -11 db,
changing it to -12db will decrease
the signal strength by 1db, and
changing it to -10db will increase the
signal strength by 1db.
Recommended adjustment range is
±5 db (in 1db steps) from the default
value.
Did this fix the problem?
Stop. Problem
resolved.
Go to your
second-level of
support (
p.6-106
"Escalating a Fax
Issue to
Second-Level
Support").