Ricoh OR-C1 - Internal Finisher Type 3352 (D586); Component Check

Internal Finisher Type 3352 (D586)
This procedure explains how to install the internal finisher, without installing the punch unit at the same
time.
Component Check
Check the quantity and condition of the components against the following list.
No. Description Q’ty
1 Internal Finisher 1
2 Guide Rail 1
3 Stopper 1
4 Screw - M4 x 6 1
5 Bind Screw - M3 x 6 8
6 Screw - M3 x 6 2
7 Positioning Pin Bracket 1
8 Finisher Right Cover 1
9 Inner Bottom Plate 1
2. Installation
98
2