Ricoh OR-C1 - PCBs and Other Items; Controller Board

A4 SEF 00000011 A6 SEF 00001101
B5 SEF 00000111 Smaller A6 SEF 00001101
By-pass Paper End Sensor
1. Remove the by-pass tray unit. ( p.252 "By-pass Tray Unit")
2. Replace the by-pass paper end sensor [A] ( x 1, hook).
Reinstalling the By-pass Paper End Sensor
• Reinstall the right hook first and then the left hook using a flat-head screw driver or similar tool.
By-pass Feed Roller
1. Remove the by-pass tray unit. ( p.252 "By-pass Tray Unit")
2. Replace the by-pass feed roller [A] (hook).
4. Replacement and Adjustment
256
4