7. Energy Saving
Energy Save
Energy Saver Modes
Customers should use energy saver modes properly, to save energy and protect the environment.
The area shaded grey in this diagram represents the amount of energy that is saved when the timers are
at the default settings. If the timers are changed, then the energy saved will be different. For example, if
the timers are all set to 240 min., the grey area will disappear, and no energy is saved before 240 min.
expires.
Timer Settings
The user can set these timers with User Tools (System settings > Timer setting)
•
Panel off timer (10 sec – 240 min): Panel Off Mode. Default setting: 1 min.
•
Auto off timer (1 – 240 min): Off/Sleep Mode. Default setting: 1 min.
Normally, Panel Off timer < Auto Off timer. But, for example, if Auto Off timer < or = Panel Off timer, the
machine goes immediately to Off mode when the Auto Off timer expires. It skips the Panel Off and
Energy Saver modes.
349
To Next Page
Loading...
Need help?
General