Internal Finisher (D586)
Item EM NOTE
Rollers C Clean with water or alcohol.
Sensors C Blower brush
Punch Chads C Discard chads.
Others Yield Parts
The parts mentioned in these tables have a target yield. However, the total copy/print volume made by
the machine will not reach the target yield within the machine’s targeted lifetime if the machine is used
under the target usage conditions (ACV, color ratio, P/J, and C/O). So, these parts are categorized not
as PM parts but as yield parts (EM parts).
Item 600K NOTE
Development Case C
2. Appendix: PM Tables
42