Ricoh OR-C1 - Optional Counter Interface Unit Type A (B870)

Key Counter Bracket Type H (A674)
Installation Procedure
Preparing before installing the key counter bracket
1. Hold the key counter plate nuts [A] on the inside of the key counter bracket [B] and insert the key
counter holder [C].
2. Secure the key counter holder to the bracket ( x 2).
3. Install the key counter cover [D] ( x 2).
4. Remove:
• Upper rear cover ( p.181 "Upper Rear Cover")
• Right rear cover ( p.181 "Right Rear Cover")
Key Counter Bracket Type H (A674)
117
2