Ricoh OR-C1 - USB2.0;SD Slot Type H (D594); Accessory Check; Installation Procedure

USB2.0/SD Slot Type H (D594)
Accessory Check
Check the quantity and condition of the accessories against the following list.
No. Description Q’ty
1 USB2.0/SD Slot 1
2 Ground Plate 1
3 USB Cable 1
4 Screw: M3 x 6 blue 1
5 Screw: M3 x 8 4
6
Screw: M3 x 6 (Used when the booklet finisher (D589)
has been installed)
1
7
Bracket (Used when the booklet finisher (D589) has
been installed)
1
8
Ground wire (Used when the booklet finisher has been
installed)
1
9 Hook and loop fastener 1
10 Decal 1
11 Decal Small 1
Installation Procedure
• If the optional booklet finisher has been installed, see the procedure in “Installation if the optional
booklet finisher has been installed” in this section.
USB2.0/SD Slot Type H (D594)
155
2