8. Format the HDD with SP5-832-1.
9. Do SP5-853 to copy the preset stamp data from the firmware to the hard disk.
10. Do SP5-846-52 to restore the address book data to the HDD.
After HDD Replacement:
•
Never remove a used HDD unit from the work site (even if it is suspected of being damaged)
without the consent of the client.
• The HDD must remain with the customer for disposal or safe keeping.
• The HDD may contain proprietary or classified (Confidential, Secret) information. Specifically, the
HDD contains document server documents and data stored in temporary files created automatically
during copy job sorting and jam recovery. Such data is stored on the HDD in a special format, so it
cannot normally be read but it can possibly be recovered with illegal methods.
4. Replacement and Adjustment
270
To Next Page
Loading...
Need help?
General