Ricoh OR-C1 User Manual

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
- -
The machine does not detect a correct signal from the punch position sensor while
the punch drive motor is operating. The 1st detection failure issues a jam error, and
the 2nd failure issues this SC code.
• Defective punch drive motor
•
Loosen connection
•
Motor overload
• Defective punch position sensor
1. Replace the punch position sensor .
2. Replace the punch drive motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
793-
08
B Punch movement motor error with 1-bin tray (D586)
794-
08
D Punch movement motor error without 1-bin tray (D586)
- -
The machine does not detect a correct signal from the punch position sensor while
the punch movement motor is operating. The 1st detection failure issues a jam
error, and the 2nd failure issues this SC code.
• Defective punch movement motor
• Loosen connection
•
Motor overload
• Defective punch position sensor
1. Replace the punch position sensor.
2. Replace the punch movement motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
793-
09
B Paper position sensor unit motor error with 1-bin tray (D586)
794-
09
D Paper position sensor unit motor error without 1-bin tray (D586)
3. Appendix: Service Call Conditions
92
3

Ricoh OR-C1 Specifications

General

Brand	Ricoh
Model	OR-C1
Category	Printer
Language	English