Ricoh OR-C1 User Manual

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
- -
The machine does not detect a correct signal from the stack height detection lever
sensor while the output tray motor is operating. The 1st detection failure issues a
jam error, and the 2nd failure issues this SC code.
• Defective output tray motor
•
Loosen connection
•
Motor overload
• Defective stack height detection lever sensor
1. Replace the stack height detection lever sensor.
2. Replace the output tray motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
793-
06
B Stack height detection lever motor error with 1-bin tray (D586)
794-
06
D Stack height detection lever motor error without 1-bin tray (D586)
- -
The machine does not detect a correct signal from the stack height detection lever
HP sensor while the stack height detection lever motor is operating. The 1st
detection failure issues a jam error, and the 2nd failure issues this SC code.
• Defective stack height detection lever motor
• Loosen connection
•
Motor overload
• Defective stack height detection lever HP sensor
• Defective stack height detection lever sensor
1. Replace the stack height detection lever sensor.
2. Replace the output tray motor.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
793-
07
B Punch drive motor error with 1-bin tray (D586)
794-
07
D Punch drive motor error without 1-bin tray (D586)
Service Call Conditions
91
3

Ricoh OR-C1 Specifications

General

Brand	Ricoh
Model	OR-C1
Category	Printer
Language	English