No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
[0702]
[0709]
[070A]
CPU/Memory Error
• System firmware problem
•
Defective RAM-DIMM
•
Defective controller
1. Reinstall the controller system software.
2. Replace the RAM-DIMM.
3. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
821 D
Self-diagnostics error: ASIC
[XXXX]: Detailed error code
[0B00]
ASIC error
The write-&-verify check error has occurred in the ASIC.
Defective ASIC device
Replace the controller.
[0B06]
ASIC detection error
The I/O ASIC for system control is not detected.
Defective ASIC
Defective North Bridge and PCI I/F
Replace the controller board.
Service Call Conditions
101
To Next Page
Loading...
