8
Duplex Left: Plain
Adjusts the left side erase margin on the reverse side of duplex copies.
The actual left side erase margin on the reverse side is this value plus the value of
SP2101-3.
The specification is 2 ±1.5 mm. See "Replacement and Adjustment - Copy Adjustment"
for details.
[0.0 to 1.5 / 0.3 / 0.1 mm/step]
9
Duplex Right: Plain
Adjusts the right side erase margin on the reverse side of duplex copies.
The actual right side erase margin on the reverse side is this value plus the value of
SP2101-4.
The specification is 2 +2.5/–1.5 mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
[0.0 to 1.5 / 0.3 / 0.1 mm/step]
10
Duplex Trail.: L Size: Thick
Adjusts the trailing edge erase margin on the reverse side of duplex copies for thick
paper longer than 297 mm.
The actual trailing edge erase margin on the reverse side is this value plus the value of
SP2101-2.
The specification is 0.5 mm or more. See "Replacement and Adjustment - Copy
Adjustment" for details
[0.0 to 4.0 / 1 / 0.1 mm/step]
11
Duplex Trail.: M Size: Thick
Adjusts the trailing edge erase margin on the reverse side of duplex copies for thick
paper of length 216.1 to 297 mm.
The actual trailing edge erase margin on the reverse side is this value plus the value of
SP2101-2.
The specification is 0.5 mm or more. See "Replacement and Adjustment - Copy
Adjustment" for details
[0.0 to 4.0 / 0.6 / 0.1 mm/step]
4. Appendix: Service Program Mode Tables
140
To Next Page
Loading...
