Ricoh OR-C1 - Page 530

1 Factory Setting: BE Color
Displays the factory setting values of the black level
adjustment for the even blue signal in the CCD circuit
board.
2 Factory Setting: BO Color
Displays the factory setting values of the black level
adjustment for the odd blue signal in the CCD circuit
board.
4677*
Analog Gain Adjust Factory Setting: R Color DFU
Displays the factory setting values of the gain adjustment for Red.
4678*
Analog Gain Adjust Factory Setting: G Color DFU
Displays the factory setting values of the gain adjustment for Green.
4679*
Analog Gain Adjust Factory Setting: B Color DFU
Displays the factory setting values of the gain adjustment for Blue.
4680*
Digital Gain Adjust DFU
Displays the gain value of the amplifiers on the controller for Red.
1 Factory Setting: RE Color
2 Factory Setting: RO Color
4681*
Digital Gain Adjust DFU
Displays the gain value of the amplifiers on the controller for Green.
1 Factory Setting: GE Color
2 Factory Setting: GO Color
4682*
Digital Gain Adjust DFU
Displays the gain value of the amplifiers on the controller for Blue.
1 Factory Setting: BE Color
2 Factory Setting: BO Color
4. Appendix: Service Program Mode Tables
172
4