1 Scan New Chart Executes new chart scanning.
2 Recall Previous Chart Recalls the previous scanned chart.
4 Set Standard Chart Restores a new chart data as a standard chart data.
5* Chromaticity Rank
Adjusts chromaticity rank. When replacing the scanner
lamp, select a number according to the barcode on the
new scanner lamp.
[0 to 255 / 0 / 1]
4991
IPU Image Pass [Path] Selection RGB Frame Memory
Selects the image path. Enter the number to be selected using the 10-key pad.
[0 to 11/ 2 / 1]
0 Scanner input RGB images
1 Scanner I/F RGB images
2 RGB images done by Shading correction (Shading ON, Black offset ON)
3 Shading data
4 Inner pattern data: Gray scale
5 RGB images done by Line skipping correction
6 RGB images done by Digital AE
7 RGB images done by Vertical line correction
8 RGB image done by Scanner gamma correction
9 RGB image done by Filtering correction
10 RGB images done by Full color ADS
11 RGB image done by Color correction
4993*
Highlight Correction
Selects the level of highlight correction.
4. Appendix: Service Program Mode Tables
176