5974*
Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full
(Professional)", is installed.
[0 to 1 / 0 / 1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
5985
Device Setting
The NIC and USB support features are built into the GW controller. Use this SP to enable
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
1
On Board NIC
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is limited only for the NRS or
LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT authentication are not available
when this SP is set to "2". Even though you can change the initial settings of those
network applications, the settings do not work.
On Board USB
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5987*
Mech. Counter
This SP detects that a mechanical counter device is removed. If it is detected, SC610
occurs.
0: OFF. 1: ON
4. Appendix: Service Program Mode Tables
246
To Next Page
Loading...
