14 Feed Clutch
15 Feed Solenoid
6009
ADF Free Run
Performs an ARDF free run in duplex mode. Press [ON] to start, press [OFF] to stop.
Note: This is a general free run controlled from the copier.
6010*
Stamp Position Adj.
Adjusts the stamp position in the sub-scan direction in fax mode.
[–5.0 to +5.0 / 0 / 0.1 mm/step]
6016*
Original Size Detect Setting
Specifies the original size for a size detected by the original sensor, since original
sensors cannot recognize all sizes.
(7) 0000 0000 (0)
Different bits are used for detection, depending on the location as shown below.
Bit Size Location
7 A4 (L)/LT (L)
Japan only
6 11" x 15"/DLT (L)
5 DLT (L)/ 11" x 15"
NA only
4 LT (S)/ US Exec (S)
3 LT (L)/ 8" x 10" (L)
2 LG (L)/ F4 (L)
1 A4 (L)/ 16K (L)
EU/AA only
0 8K (L)/ DLT (L)
6017*
DF Magnification Adj.
Adjusts the magnification in the sub-scan direction for the ARDF.
[-5.0 to 5.0 / 0 / 0.1 %/step]
4. Appendix: Service Program Mode Tables
250
To Next Page
Loading...
