1 Entrance Sensor Paper No Paper
2
Hitroll HP Sensor
(Positioning Roller HP Sensor)
Not HP At HP
3
Front Jogger HP Sensor
(Front Fence HP Sensor)
Not HP At HP
4
Rear Jogger HP Sensor
(Rear Fence HP Sensor)
Not HP At HP
5 Staple Tray Paper Sensor Paper No Paper
6
Staple Moving HP Sensor
(Stapler HP Sensor)
Not HP At HP
7 Stack Feed-Out Belt HP Sensor Not HP At HP
8 Shift Tray Paper Sensor Not HP At HP
9 Upper Cover Sensor Not HP At HP
10 Stapler Rotation Sensor HP Not HP
11 Staple Near End Sensor HP Not HP
12 Self Priming (Stapler) HP Not HP
13
Shift Tray Limit Sensor
(Tray Upper Limit SW)
Not Full Full
6142
FIN (RUB) Input Check Inner Finisher D586
Displays the signals received from sensors and switches of the finisher.
Note:
• The names in parentheses below are the names used in the service manuals.
"0" means LOW, "1" means HIGH.
Component 0 1
1
Entrance Sensor
2
Carry Sensor
(Feed Sensor)
4. Appendix: Service Program Mode Tables
260
To Next Page
Loading...
