3 Front Jogger Motor Front Fence Motor
4 Rear Jogger Motor Rear Fence Motor
5 Staple Moving Motor Stapler Movement Motor
6 Stack Feed-Out Motor Feed-Out Belt Motor
7 Tray Motor Tray Lift Motor
8 Staple Motor Stapler Motor
9 Stopper Solenoid Stack Depressor Solenoid
6147
FIN (RUB) Output Check 500-Sheet Finisher D586
Displays the signals received from sensors and switches of the finisher.
Note: In the table below, "Display" is what you see on the screen, and "Component" is
the name used in the service manuals.
Display Component
1 Entrance Motor Entrance Roller Motor
2 Carry Motor Feed Roller Motor
3 Exit Motor Exit Roller Motor
4 Front Jogger Motor Jogger Fence Motor (Front)
5 Rear Jogger Motor Jogger Fence Motor (Back)
6 Shift Motor Shift Roller Motor
7 Hitroll Motor Pick-up Roller Motor
8 Exit Guide Plate Motor Exit Guide Plate Motor
9 Staple Moving Motor Stapler Unit Motor
10 Tray Motor Output Tray Motor
11 Staple Motor Stapler Unit Motor
12 Stopper Motor Stack height detection lever Motor
13 Punch Motor Punch Drive Motor
14 Punch Moving Motor Punch Movement Motor
4. Appendix: Service Program Mode Tables
264
To Next Page
Loading...
