• When the user enters document server mode and prints data stored on the document server, only
the L: counter increments.
• When an image received from Palm 2 is received and stored, the L: counter increments.
•
When the customer prints a report (user code list, for example), the O: counter increments.
However, for fax reports and reports executed from the fax application, the F: counter increments.
8011 T:Jobs/LS
These SPs count the number of jobs stored to the document
server by each application, to reveal how local storage is
being used for input.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored from within
the document server mode screen at the operation panel.
8012 C:Jobs/LS
8013 F:Jobs/LS
8014 P:Jobs/LS
8015 S:Jobs/LS
8016 L:Jobs/LS
8017 O:Jobs/LS
• When a scan job is sent to the document server, the S: counter increments. When you enter
document server mode and then scan an original, the L: counter increments.
• When a print job is sent to the document server, the P: counter increments.
•
When a network application sends data to the document server, the O: counter increments.
• When an image from Palm 2 is stored on the document server, the O: counter increments.
• When a fax is sent to the document server, the F: counter increments.
8021 T:Pjob/LS
These SPs reveal how files printed from the document server
were stored on the document server originally.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored from within
the document server mode screen at the operation panel.
8022 C:Pjob/LS
8023 F:Pjob/LS
8024 P:Pjob/LS
8025 S:Pjob/LS
8026 L:Pjob/LS
8027 O:Pjob/LS
• When a copy job stored on the document server is printed with another application, the C: counter
increments.
System SP Tables-8
285
To Next Page
Loading...
