8063
F:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for fax jobs only. The finishing method is
specified by the application.
Note: Finishing features for fax jobs are not available at this time.
8064
P:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for print jobs only. The finishing method is
specified by the application.
8065
S:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for scan jobs only. The finishing method is
specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066
L:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs output from within the document server
mode screen at the operation panel. The finishing method is specified from the
print window within document server mode.
8067
O:FIN Jobs [0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs executed by an external application,
over the network. The finishing method is specified by the application.
1 Sort
Number of jobs started in Sort mode. When a stored copy job is
set for Sort and then stored on the document server, the L: counter
increments. (See SP8066 1)
2 Stack Number of jobs started out of Sort mode.
3 Staple Number of jobs started in Staple mode.
4 Booklet
Number of jobs started in Booklet mode. If the machine is in staple
mode, the Staple counter also increments.
5 Z-Fold
Number of jobs started In any mode other than the Booklet mode
and set for folding (Z-fold).
6 Punch
Number of jobs started in Punch mode. When Punch is set for a
print job, the P: counter increments. (See SP8064 6.)
7 Other Reserved. Not used.
4. Appendix: Service Program Mode Tables
288
To Next Page
Loading...
