• Previews done with a scanner driver are not counted.
• A count is done only after all images of a job have been scanned.
•
Scans made in SP mode are not counted.
Examples:
• If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count
is 4.
• If both sides of 3 A4 sheets are copied and stored to the document server using the Store File
button in the Copy mode window, the C: count is 6 and the L: count is 6.
• If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
8201
T:LSize Scan PGS [0 to 9999999/ 0 / 1]
These SPs count the total number of large pages input with the scanner for scan,
fax and copy jobs.
Note: These counters are displayed in the SMC Report, and in the User Tools
display.
8203 F:LSize Scan PGS [0 to 9999999/ 0 / 1]
These SPs count the total number of large pages input with the fax jobs. Large size
paper (A3/DLT) scanned for scan jobs are not counted.
Note: These counters are displayed in the SMC Report, and in the User Tools
display.
8205
S:LSize Scan PGS [0 to 9999999/ 0 / 1]
These SPs count the total number of large pages input with the scanner for scan
jobs only. Large size paper (A3/DLT) scanned for fax transmission are not
counted.
Note: These counters are displayed in the SMC Report, and in the User Tools
display.
8211 T:Scan PGS/LS
These SPs count the number of pages scanned into the
document server .
[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from
within the document server mode screen at the
operation panel, and with the Store File button from
within the Copy mode screen
8212 C:Scan PGS/LS
8213 F:Scan PGS/LS
8215 S:Scan PGS/LS
8216 L:Scan PGS/LS
4. Appendix: Service Program Mode Tables
294
To Next Page
Loading...
