Ricoh OR-C1 - Booklet Finisher SR3100 (D589)

3. Install the grounding plate [A] on the finisher ( x 2; M3x8).
• Use the screw removed in step 1 and the screw from the accessory box.
4. Open the front door [B]. Then pull the locking lever [C].
5. Align the finisher on the joint brackets, and lock it in place by pushing the locking lever.
6.
Secure the locking lever (
x 1; knob M3x8) and close the front door.
7. Install the copy tray [D] ( x 1; knob M4x10).
8. Connect the finisher cable [E] to the main machine.
Finisher SR3090 (D588)
79
2