• The list displayed in Step 5 includes custom paper with configurations whose match rates are 80%
or higher.
• You can check and change the settings of the registered custom paper such as the paper size
setting on the [Edit Custom Paper] screen. For details about modifying the custom paper, see
"Modifying a Custom Paper", Paper Settings.
Registering a new custom paper with the Media Identification Unit
1. Display the [Tray Paper Settings] screen.
• When using the standard operation panel
1. Press the [Paper Setting] key.
• When using the Smart Operation Panel
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Press the [User Tools] icon ( ) on the [Home] screen.
3. Press [Tray Paper Settings].
2. Press [Edit Custom Paper].
3. Press [New Program].
4. Press [Scan Value to Program with Media Identification Unit].
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
8. Adding Paper and Toner
212
To Next Page
Loading...
