• If you press [Preview] and then start scanning, the [Preview] screen appears. You can use this
screen to check how the originals are scanned and the scan setting used for scanning. After
checking the preview, you can specify whether to send the file or not.
• To cancel scanning, press [Stop]. Check the information displayed in the dialog box, and then
press any key.
• You can also store a scan file and simultaneously send it by e-mail.
• See "Simultaneous Storage and Sending by Scan to Folder", User Guide.
• After an e-mail is sent, the destination, sender, subject, text, and file name fields will be
automatically cleared. If you want to preserve the information in these fields, contact your local
dealer.
• You cannot switch the screen while WSD destination is being specified. To clear the specified
destination, display the destination in the destination field of each screen, and then press [Clear].
• You can specify whether to send a file as an e-mail attachment or by sending a URL link in [File
Emailing Method].
• When [Login User Address Priority] is set to [On], the login user's e-mail address is specified as a
destination after you log in to the machine and display the initial scanner screen.
5. Scan
162
To Next Page
Loading...
