Ricoh Pro C5300S - Page 234

• Check that the paper is correctly positioned against the back of the paper feed tray and the
label on which is printed the paper sizes for the paper tray.
• When you load paper that is 420.0-559.9 mm (16.54–22.00 inches) wide, use two short-
end fences.
D0CPIC1390
1
1
3
3
2
2
1. Side fence extension
2. Side fence
3. Short-end fences
• When you load paper that is 560.0-700.0 mm (22.00–27.55 inches) wide, use one long-
end fence.
D0CPIC1391
11
22
33
1. Side fence extension
2. Side fence
3. Long-end fences
• When you load paper, load the paper and set the auxiliary side fence. Align the auxiliary
side fence against the side of the paper that is higher than the side fence extension.
• Adjust the side fences according to the corresponding instructions on the label attached to the
tray.
8. Paper Specifications and Adding Paper
232