The list of custom paper whose configurations are similar to those of the scanned paper
appears.
5. Select the custom paper you want to use, and then press [OK].
6. Press [Yes] [Exit] [Exit].
7. Press [Home] ( ) to close the [Tray Paper Settings] screen.
• The list displayed in Step 5 includes custom paper with configurations whose match rates are
80% or higher.
• You can check and change the settings of the registered custom paper such as the paper size
setting on the [Edit Custom Paper] screen. For details about modifying the custom paper, see
page 305 "Modifying a Custom Paper".
Registering a new custom paper with the Media Identification Unit
1. Press [Tray Paper Settings] on the Home screen.
2. Press [Edit Custom Paper] [New Program] [Scan Value to Program with Media
Identification Unit].
3. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
Registering Custom Paper
301
To Next Page
Loading...
