10. Press [Home] ( ) to close the [Tray Paper Settings] screen.
• For details about custom paper settings, see page 306 "Custom Paper Settings".
• You cannot modify a custom paper that is assigned to a paper tray. To modify it, cancel the
assignment.
• For details about [Advanced Settings], contact your machine administrator.
• Sheets of custom paper are assigned with a sequential number from 0001. You can change
the number on the [Change Custom Paper Settings] screen.
• Press [Scan and Update Value of Media Identification Base Data] to register the information
scanned by the Media Identification Unit. Also press this button to increase identification
accuracy to search for custom paper or register information from custom paper that was
registered without using the master library.
Specifying a custom paper for paper trays with the Media Identification Unit
1. Press [Tray Paper Settings] on the Home screen.
2. Select the number of the tray whose paper settings you want to specify.
3. Press [Paper Type Auto Identification].
4. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
9. Paper Settings
304
To Next Page
Loading...
