4. Press [Scan Value to Program with Media Identification Unit].
5. Insert paper into the Media Identification Unit, and then remove it.
Hold the edges of the paper with both hands when inserting the paper.
Keep the paper flat as you pull it out.
"Paper Weight" and "Paper Thickness" as well as "Coated Paper Type" (excluding Matte) are
automatically specified.
6. Change the settings.
If you change the [Paper Weight], [Paper Type], [Coated Paper Type], [Paper Color],
[Prepunched or Not], or [Textured or Not] and press [OK], a message appears to notify you
that the [Advanced Settings] will be initialized. To apply the changes for those settings, select
[Change]. To cancel the changes, select [Do not Change].
7. Press [OK].
If the message "Some functions cannot be set at the same time. Check the settings." appears,
adjust the settings with the icon.
8. Press [Overwrite].
Press [Save] to register the paper settings as another custom paper.
9. Press [Yes] [Exit].
Registering Custom Paper
303
To Next Page
Loading...
