1. Log in as the user administrator from the printer's control panel.
2. Select [Security Options] Press [OK]
3. Select [Extended Security] Press [OK]
4. Select [Encrypt Address Book] Press [OK]
5. Select [On] [Enc.Key]
6. Select [Enter] Enter the encryption key Select [Accept]
Enter the encryption key using up to 32 alphanumeric characters.
7. Select [Enter] Re-enter the encryption key Select [Accept]
8. Press [OK].
9. Select [OK].
Do not switch the main power off during encryption, as doing so may corrupt the data.
Encrypting the data in the address book may take a long time.
The time it takes to encrypt the data in the address book depends on the number of registered
users.
The printer cannot be used during encryption.
Normally, once encryption is complete, [Exit] appears.
If you press [Stop] during encryption, the data is not encrypted.
If you press [Stop] during decryption, the data stays encrypted.
10. Select [Exit].
11. Press [Menu] twice.
12. Log out.
1. Log in as the user administrator from the control panel.
2. Display the "Encrypt User Custom Setting & Address Book" screen.
[System Settings] [Administrator Tools] [Extended Security] [Encrypt User Custom Setting
& Address Book]
3. Enter the encryption key.
[On] [Change Encryption Key] Enter the encryption key [OK]
Enter the encryption key using up to 32 alphanumeric characters.
4. Perform encryption.
[Encrypt/Decrypt] [Yes]
Protecting the Address Book
83
To Next Page
Loading...
