Ricoh SP 4520DN - Load Font Control

Offset Range Meaning Error Code
6 INTENDED USE FLAGS X'02B2..0
4'
X'02B2..0
1'
X'02B2..0
2'
Bit 0: 0/1 Not intended for MICR printing/Intended for MICR printing (If
MICR Installed)
Bit 1: 0/1 This is NOT a FCS extension/This IS a FCS extension
Bits 2-7:
000000
Reserved
7-10 X'000000
02' -
X'FFFFFFFF'
NUMBER of BYTES in the LOAD FONT COMMANDS X'022E..
02'
X'0232..0
2'
X'02B0..0
E'
11-14 X'000000
02' -
X'FFFFFFFF'
NUMBER of BYTES in the CHARACTER ID MAP X'02B0..0F
'
15-16 X'nnnn' NUMBER of GCGIDs in the CHARACTER ID MAP
17-18 GCSGID
X'0000' No Value Supplied
X'0001' -
X'FFFE'
Specific GCSGID
X'FFFF' Use Default
19-20 FGID
X'0001' -
X'FFFE'
Specific FGID
12
Load Font Control
This command is 40 + (8 × n) bytes long, where n (4090 max) is the number of font characters that have
associated raster patterns. The command contains font id, overall font characteristics, and the
Loaded Font Function Set Commands
203