Administrator Login Method
If administrator authentication has been specified, log in using an administrator's user name and
password. Supervisors log in the same way.
Logging in Using the Control Panel
1. Press [Menu] Select [Login]
2. Select [Enter] Enter the login user name Select [Accept]
The default login name for administrators is "admin" and "supervisor" for supervisors.
3. Select [Enter] Enter the login user password Select [Accept]
There is no preset default password for administrators or supervisors. Therefore, leave the
password field blank and select [Accept].
1. Press the [User Tools] key.
2. Press the [Login/Logout] key.
3. Press [Login].
4. Enter the login user name of the administrator, and then press [OK].
The default login name for administrators is "admin" and "supervisor" for supervisors.
5. Enter the login password of the administrator, and then press [OK].
There is no preset default password for administrators or supervisors. Therefore, leave the
password field blank and press [OK].
"Authenticating... Please wait." appears, followed by the screen for specifying the default.
Administrator Login Method
23
To Next Page
Loading...
