Sense Type and Model
Causes the printer to place into the Special Data Area of the Acknowledge Reply (See page 10
"Acknowledgement Reply") a record containing type and model information and the functions the printer
supports.
This command is effectively a NOP if the ARQ bit is NOT ON in the command header.
Sense Type and Model
Offset Range Meaning
0 X'FF' Convention
1-2 Product Code
X'2707' SP 4510DN/SP 4520DN
X'4028' 4028 Emulation (4028)
3 Model
X'01' SP 4510DN
X'02' SP 4520DN
X'00' 4028 Emulation (Simplex)
X'12' 4028 Emulation (Duplex)
4-5 X'0000' Reserved
Device-Control Command Set
Offset Range Meaning
0-1 X'nnnn' VECTOR LENGTH
2-3 X'C4C3' DEVICE CONTROL Command-Set ID
4-5 X'FF10' DC1 Subset ID
6-7 X'6001' MULTIPLE COPY and COPY-SUBGROUP support in LCC
8-9 X'6002' Media-source-selection support in LCC
10-11 X'6003' Media-destination-selection support in LCC
12-13 X'6101' Explicit Page Placement and Orientation Support
1. Device Control Command Set
48
To Next Page
Loading...
