XOH Specify Group Operation
This order indicates to an attached printer, pre-processor, or post-processor that the specified
processing option is to be performed upon subsequent boundary groups of the group level identified in
this command.
Offset Range Meaning Error Code
0-1 X'0300' Define Group Boundary
2 X'00'-X'FF' Operation Identifier
X'01' Keep group together as a print unit
X'04' Finish
3 X'00'-X'FF' Group Level
• For SGO Identifier (Byte 2), X'01' and X'04' are the only supported operations. All other identifiers
are accepted, although no specific processing will occur.
Execute Order Home State (XOH)
105
To Next Page
Loading...
