• If Administrator Authentication Management is specified, contact your administrator.
1. Press the [User Tools] key.
2. Select the settings you want to change.
Press [ ] or [ ] to display the next or previous page.
3. Change the settings by following the instructions on the display, and then press [OK].
4. Press the [User Tools] key.
• Any changes you make with the configuration screens remain in effect even if the main power
switch is turned off.
•
To cancel changes made to the settings and return to the initial display, press the [User Tools] key.
Displaying the Printer Configuration Screens Using the Control Panel
31
To Next Page
Loading...
