End Date/Time
The event end date and time is recorded.
Log Type
The type of eco-friendly log is recorded.
Power ON, Power OFF, Status of Power, Job Information or Consumption of Paper is recorded.
Log Result
Whether an event has completed or not is displayed.
If an event has completed, "Completed" is recorded. Otherwise, "Failed" is recorded.
Result
The result of the event is recorded.
If an event is successful, "Succeeded" is recorded. If it fails, "Failed" is recorded.
Log ID
Identifies the ID that is assigned to the log. This is a hexadecimal ID that identifies the log.
Power Mode
The power status of the printer (after state transition) is logged.
Value Content
Standby Standby status
Silent Silent status
Engine Off The engine is stopped.
Controller Off The controller is stopped.
STR STR state (Suspend to RAM)
Silent Print Silent print status
Low Power Print Low power print status
Log Type
The type of job log is recorded.
Job Interval (seconds)
The elapsed time from the start of the previous job until the start of the job is recorded.
Job Duration (seconds)
The elapsed time from the start of a job until its end is recorded.
7. Managing the Printer
192
To Next Page
Loading...
