I0208-000 / I0208-002
The account is locked because you have reached the maximum number of failed authentication attempts
allowed.
•
Ask the user administrator to unlock the account.
I0406-003
An authentication error occurred because the user name contains a space, colon (:), or quotation mark
(").
•
Recreate the account if the account name contains any of these prohibited characters.
• If account name was entered incorrectly, enter it correctly and log in again.
I0406-301: Case 1
The URL could not be obtained.
•
Obtain the URL using Obtain URL in Integration Server authentication.
I0406-301: Case 2
A login user name or password error occurred.
•
Make sure the login user name and password are entered correctly.
• Make sure that a usable login name is registered on the printer. Authentication will fail in the
following cases: If the login user name contains a space, colon (:), or quotation mark ("). If the login
user name exceeds 128 bytes.
I0409-000
Authentication timed out because the server did not respond.
•
Contact the server or network administrator. If the situation does not return to normal, contact your
service representative.
I0511-000
The authentication server login name is the same as a user name already registered on the printer.
(Names are distinguished by the unique attribute specified in the LDAP authentication settings.)
•
Delete the old, duplicated name or change the login name.
• If the authentication server has just been changed, delete the old name on the server.
I0606-004
Authentication failed because the user name contains language that cannot be used by general users.
•
Do not use "other", "admin", "supervisor" or "HIDE*" in general user accounts.
I0607-001
An authentication error occurred because the Address Book is being used at another location.
•
Wait a few minutes and then try again.
If an Error Code is Displayed
241
To Next Page
Loading...
Need help?
General
Weight and Dimensions
