the printer FSA using the value of the MGMTMODE parameter. TIMEOUT=STOP requests that PSF
stop the printer FSA, which can then be restarted only by an operator command.
•
DISCINTV
Specifies the disconnect interval in seconds. The value can range from zero to 86400. We suggest
you set the value to "15". When no output is available from JES for this time period, PSF ends the
session with the network printer. If the value is set to zero, PSF does not end the session because of
lack of output, and other IPDS hosts will not be able to share the printer.
Sharing the Network Printers on z/OS
41
To Next Page
Loading...
