Ricoh SP 4520DN - Page 935

Offset Range Meaning Error Code
10 UNIT BASE for L-units X'021B..
02'
X'00' Ten in. (fixed metric technology)
X'02' Relative units (relative metric technology)
11 X'00' Reserved
12-13 L-units per UNIT BASE in the X direction
Byte 10 = X'02'
X'022A..
02'
X'03E8' 1000
Byte 10 = X'00'
X'0960' 2400 (240 DPI)
X'0BB8' 3000 (300 DPI)
X'1770' 6000 (600 DPI)
14-15 L-units per UNIT BASE in the Y direction
Byte 10 = X'02'
X'022B..
02'
X'03E8' 1000
Byte 10 = X'00'
X'0960' 2400 (240 DPI)
X'0BB8' 3000 (300 DPI)
X'1770' 6000 (600 DPI)
16-17 X'0000' Reserved
18-20 X'000001'
- X'7FFFFF'
FONT BYTE COUNT X'021C..
02'
21 CHARACTER DATA ALIGNMENT X'022D..
02'
X'01' Starting address 1 byte aligned
X'04' Starting address 4 byte aligned
X'08' Starting address 8 byte aligned
22-23 X'nnnn' GCSGID (ignored)
Loaded Font Function Set Commands
205