Ricoh SP C360 series User Manual

can print only in black and white after any of the cyan, magenta, or yellow toner runs out. Keep the
empty print cartridge attached until you replace it with a new print cartridge.
• Fault may occur if you use toner other than the recommended type.
• When adding toner, do not turn off the main power. If you do, settings will be lost.
• Store toner where it will not be exposed to direct sunlight, temperatures above 35°C (95°F), or
high humidity.
• Store toner horizontally.
• Do not shake the toner cartridge with its mouth down after removing it. Residual toner may scatter.
• Do not repeatedly install and remove toner cartridges. This will result in toner leakage.
• Do not touch the shutter on the bottom side of the print cartridge.
DSE264
Follow the instruction on the screen regarding how to replace a toner cartridge.
• If "Toner Cartridge is almost empty." appears on the display, the toner has almost run out. Have a
replacement toner cartridge at hand.
• If appears when there is a lot of toner, hold the cartridge with the opening upward, shake it
well, and then reinstall it.
• When "No toner." appears on the display, you can check the name of the required toner and the
replacement procedure using the [ Add Toner] screen. To display the [ Add Toner] screen, press
[Check Status], and then press [Check] in the [Mach. Status] area in the [Mach./Applic. Stat] tab.
8. Adding Paper and Toner
134

Ricoh SP C360 series Specifications

General

Duplex Printing	Yes
AirPrint Enabled	Yes
Max Printing Resolution	1200 x 1200 dpi
Max Copying Resolution	600 x 600 dpi
Max Document Enlargement	400%
Max Document Reduction	25%
Bypass Tray Capacity	100 sheets
Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 dpi
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing Capability	Yes
Original Size	A4
Media Type	Plain paper, envelopes, labels
Media Sizes	A4, A5, B5, Letter, Legal, Executive, Folio
Functions	Print, copy, scan
Operating System Compatibility	Windows, macOS