Press Mode to select "XY" to enable the XY cursor measurement function. The
measurement results will be displayed at the upper-left corner of the screen, as
shown in the following figure.
• AX: indicates the X value at Cursor A.
• AY: indicates the Y value at Cursor A.
• BX: indicates the X value at Cursor B.
• BY: indicates the Y value at Cursor B.
• ΔX: indicates the horizontal spacing between Cursor A and Cursor B.
• ΔY: indicates the vertical spacing between Cursor A and Cursor B.
1.
Adjust the Cursor Position
- Press AX, then rotate the multifunction knob to adjust the X value at Cursor
A.
- Press BX, then rotate the multifunction knob to adjust the X value at Cursor
B.
- Press AY, then rotate the multifunction knob to adjust the Y value at Cursor
A.
- Press BY, then rotate the multifunction knob to adjust the Y value at Cursor
B
- Press More > ABX, then rotate the multifunction knob to adjust the X values
at Cursor A and Cursor B simultaneously.
- Press
More > ABY, then rotate the multifunction knob to adjust the Y values
at at Cursor A and Cursor B simultaneously.
During the adjustment, the measurement results will change accordingly. The
adjustable range is limited within the screen.
Operations and Measurements
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
197
To Next Page
Loading...
