a. Press Show Time continuously to open or close the system time interface.
b. Set "year": Press Year, rotate the multifunction knob directly to set it or use
the pop-up numeric keypad to input the numeric value to set it.
c. Set "month": Press Month, rotate the multifunction knob directly to set it or
use the pop-up numeric keypad to input the numeric value to set it.
d. Set "day": Press Day, rotate the multifunction knob directly to set it or use
the pop-up numeric keypad to input the numeric value to set it.
e. Set "hour": Press Hour, rotate the multifunction knob directly to set it or use
the pop-up numeric keypad to input the numeric value to set it.
f. Set "minute": Press
Minute, rotate the multifunction knob directly to set it or
use the pop-up numeric keypad to input the numeric value to set it.
The setting range of each item of the system time conforms to the convention.
- Year: 2017 to 2099
- Month: 01 to 12
- Date: 01 to 31 (28, 29, or 30)
- Hour: 00 to 23
- Minute: 00 to 59
- Second: 00 to 59
2. Apply the Currently Set System Time
Press
Apply to validate the current settings. The time at the lower-right side of the
screen will be updated.
23.2.18 Default Option
Used for configuring the key.
Press > More > More > Default Option to enter the default option menu.
Press Keep Impedance to enable or disable the impedance keep function. If you
select ON, after you press , the impedance value that you set remains
unchanged and other settings will be restored to the default settings. If you select
System Utility Function Setting
376
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
