Rigol MSO8000-BND - Exp.fall; Ecg; Figure 21.5 Exp.fallexp.fall

21.1.9 Exp.Fall
Press Wave, then use the multifunction knob to select "Exp.Fall" and then press
down the knob to select the waveform. You can also press Wave continuously or
enable the touch screen to select it. At this time, you can set the parameters for the
Exp.Fall waveform (as shown in the figure below). For setting methods, refer to
descriptions in " To Output Sine ".
Figure 21.5 Exp.Fall
21.1.10 ECG
Press Wave, then use the multifunction knob to select "ECG" and then press down
the knob to select the waveform. You can also press Wave continuously or enable the
touch screen to select it. At this time, you can set the parameters for the ECG
waveform (as shown in the figure below). For setting methods, refer to descriptions in
" To Output Sine ".
Function/Arbitrary Waveform Generator (Option)
306
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.